Powder Coating Equipment, Powder Coating Spray Booths, Powder Coating Spray Tunnels, Cyclone Recovery Systems, Powder Coating Spray Booth Equipment, Reciprocators, Sieve Unit, Pre Treatment Systems, Camel Back Ovens, Batch Ovens, Powder Coating Equipment Spare Parts & Service
 
Powder Coating Equipment
Cyclone Recovery Systems
Reverse Pulse AFter Filters
Powder Coating Spray Booths
Spray Tunnels
Infra Red Ovens
Camel Back Ovens
Batch Ovens
Conveyors
Pre-treatment Systems
Reciprocators and Sieves
Spare Parts
Gravity Chain
Paint Spraybooths and Dry Filters

Contact Us

Tel: +27 11 6090783
Fax: +27 11 4529596

Postal address:
P.O.Box 4100
Edenvale
1610
South Africa

E-mail: nkrauss@powder-rite.com


Service and Parts

Powder-Rite

1. Gauge 600 Kpa. part no. 00GAU02
2. Gauge 250 Kpa. part no. 00GAU01
3. Regulator part no. 00REG01
4. Display bar PR part no. 00HIG03
5. Pot High Voltage part no. 00POT01
  High Voltage knob part no. 00HIG02
6. Switch panel mount part no. 00SWI02
7. Pilot light part no. 00PIL01

8. Fuse holder part no. 00FUS03
  Fuse 3 Amp. part no. 00FUS01
9. Socket 7 pin part no. 00SOC03
10. Quick release male part no. 00FITQ02
11. Bulkhead 8 mm part no. 00FITB03
12. Bulkhead 6 mm part no. 00FITB02
13. Bulkhead 6 mm part no. 00FITB02

Powder Pistol

  1. Nozzle nut
  2. Back body holder
  3. Barrel front
  4. Hook
  5. Barrel rear
  6. Deflector 16 / 24 / 32 mm
  1. Deflector rod 85 / 110 mm
  2. Back body
  3. Hose connector
  4. Trigger (micro switch behind)
  5. Compression gland
  6. Handel

Injector / Powder Pump

  1. Quick release fitting 6 mm
  2. Quick release fitting 6 / 8 mm
  3. Injector block
  4. Injector
  5. O Ring
  1. Hose connector
    1. Plastic
    2. Plastic / Teflon
    3. Teflon
  2. Nut
  3. Suction pipe
   

Copyright © 2009 Powder-rite
Powder Coating Equipment Spare Parts & Service